PEC2005A economical metal separator (manual feeding)

Plastic industry, chemical industry, food industry

Category:

Metal Separator

Product Accessories:

Online Message

Description
Specification

(1) Feeding tube (2) Detection coil (3) Controller (4) Metal impurities (5) Reject plate (6) Scrap port (7) Qualified material cutting pipe

One. Industry applications

Rubber and plastic industry, chemical industry, food industry.

Two. How it works

The raw material passes through the detector (2) in a falling manner, and when the metal is detected, the separation baffle (5) is activated as soon as it is detected, and the raw material containing the metal particles (4) is separated from it

The port (6) is eliminated, and the qualified product falls directly into the qualified material from the (7) qualified material feeding pipe.

Three. Product advantages

1. Intelligent detection, maintenance-free;

2. The metal material of the shell and the direct contact with the product part are made of stainless steel 304;

3. Special structural design can effectively avoid the interference of external factors such as vibration, noise and product effect;

4. A variety of calibers are available, and the models meet all practical applications;

5. It can avoid product accumulation and blockage and cause mold;

Four. Performance characteristics

1. Set detection coil, controller, separation device in one, easy to install and use;

2. Rapid rejection through the rejection device can greatly reduce the loss of materials;

3. Small installation height, easy to integrate;

4. Test material characteristics: dry, good fluidity, no long fiber, no conductivity;

5. Detection material temperature: less than 80 °C, temperature beyond this range, optional special high temperature option;

6. The controller can be installed at 10m of the detection position;

7. It is mainly used to detect loose granular materials (particles (8mm) fed by gravity self-flow, and can be used in plastic industry, food industry, chemical industry, etc.

Five. Benefits of using a metal separator

1. Protect production equipment

2. Improve production efficiency

3. Improve the utilization rate of raw materials

4. Improve product quality

5. Reduce equipment maintenance costs and losses caused by shutdown maintenance
Key words:
- Metal Separator

Structural dimensions and specifications:

Model	Feed pipe diameter(mm)	Detection sensitivity		Maximum throughput L/h	Installation height mm
Model	Feed pipe diameter(mm)	FeΦ	SUSΦ	Maximum throughput L/h	Installation height mm
PEC2005A2-30	30	0.4mm	0.8mm	400	370
PEC2005A2-50	50	0.6mm	1.0mm	2000
PEC2005A2-70	70	0.8mm	1.2mm	5000
PEC2005A2-100	88	1.0mm	1.5mm	12000	473
PEC2005A2-120	108	1.2mm	2.0mm	16000	473
PEC2005A2-150	138	2.0mm	2.5mm	25000	600
PEC2005A2-200	188	2.5mm	3.0mm	44000	922
PEC2005A2-250	238	3.0mm	3.5mm	69000	948

PEC2005G2 Pharmaceutical Metal Separator

None

PEC2005G2 Pharmaceutical Metal Separator

None

Online Message